Home Page Image
 

  

Suitable for model cars,airplanes,boats and robots.
 

 

vg2cl

 

 

The VG2CL is designed to operate with 2S Li-poly batteries only.
It connects to the battery by soldering the positive (red) and negative (black) wires to the speed controller connector or the receiver's regulator connector.
The VG2CLR is a VG2CL fitted with a special connector (not wires) suitable for battery low checking on the RX regulator
It is samples the battery voltage continuously and flashes a bright LED whenever the voltage drops below 6.2V which is the lowest safe voltage for a 2S LiPo pack .You should stop using the pack and charge it if the LED flashes .

Weight 5 gr.
Dimensions 19 x 13 x 5 mm
Current drain 4mA (LED off) - 30mA(LED on)
VG2CLR provides the ON command automatically to the RX regulator in order to check under load

 

 

     
Copyright © 2007-2010 by Grele"   •   All Rights reserved   •